Joseph-Kraebel
- Total activity 36
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 18
Activity overview
Latest activity by Joseph-Kraebel-
Joseph Kraebel created an article,
Minimum Requirements for Running ClearStream Software
System Requirements: A Windows PC running Windows Vista/7/8/10/11, Windows Server 2008/2012/2016/2019. Microsoft .NET Framework 4.8 or greater (You will be prompted for install if required). A Com...
-
Joseph Kraebel created an article,
"Find Reader" Feature Does Not Return Device ID or Correct IP Address / Host Name
If when using the "Find Reader" feature in ClearStream's Device Configuration, the application is able to find the reader but it does not appear to correctly return the IP Address / Host Name or po...
-
Joseph Kraebel created an article,
How to Locate the Event Log within ClearStream
The ClearStream Event Log holds important information about the operating status of ClearStream, including a number of possible errors that could occur during use. You can find this event log withi...
-
Joseph Kraebel created an article,
ClearStream RFID is not streaming data to my Excel sheet when using the Windows Service.
If you are using ClearStream RFID with Microsoft Excel using the Windows Service, you may find that data is not streaming to your excel sheet. This can be due to the need for a Desktop folder added...
-
Joseph Kraebel created an article,
LLRP Readers unable to connect again after showing as not connected.
There is a known issue in ClearStream with LLRP readers such as Impinj that are unable to connect with the software once it shows as not connected. This could be due to opening the ClearStream soft...
-
Joseph Kraebel created an article,
Custom Web Service End Points
Looking to send your ClearStream RFID data to a web server with a customized format? Examples of the could include: Sending JSON to a web service API Posting GET parameters to a web page Formattin...
-
Joseph Kraebel created an article,
Feig Reader Operating Modes
If you are using a Feig reader and have everything in ClearStream properly configured, yet seem to be unable to read any tags, you should check to see if the reader is in the correct operating mode...
-
Joseph Kraebel created an article,
How do you set ClearStream RFID to start reading tags?
Reads are triggered via a Start/Stop button within the ClearStream RFID software and can be set to run continuously, run at timed intervals for a defined time duration, or can be triggered via a de...
-
Joseph Kraebel created an article,
Using ClearStream RFID as a Windows Service
Configuring the ClearStream RFID Service is a multi-step process. Here is a list of steps to take to get the ClearStream RFID Service up and running. Save your ClearStream RFID Project file and ...
-
Joseph Kraebel created an article,
Feig Readers and Reading Multiple Tag Memory Banks
When using Feig readers there are few important points to consider when reading multiple memory banks of an RFID Tag. The behavior can change depending on the Operating Mode that the reader is in. ...